Input Signal Flow - Yamaha Audiogram 3 Owner's Manual

Rear Panel
8
MIC/INST Input Jack
Microphones and instruments such as gui-
tars can be connected here using XLR or
phone jack cables. Set the MIC/INST
2
switch to MIC or INST according to the
type of device connected.
XLR-type
You can directly connect an elec-
NOTE
tric guitar or bass without the
need for a separate DI (Direct
Injection) box or amp simulator.
9
LINE Input Jacks
These inputs are intended mainly for use
with instruments and equipment having
stereo outputs, such as a synthesizer or
CD player.

■ Input Signal Flow

Adjust the recording level
as well as the balance
between channels.
Input
!1 !0
Phone-type
3 LEVEL
Record
controls
Cubase AI
Controls and Functions
o i
If devices are connected to both phone
and pin jacks, only the signal from the
device connected to the phone jacks is
input.
Phone-type
0
STEREO OUT Jacks
These output the mixed signal from chan-
nels 1 and 2. The output level can be
adjusted using the OUT LEVEL control.
These jacks would typically be connected
to an audio system (monitor speakers).
You can use either the phone jacks
NOTE
or pin jacks but not both at the
same time. If both jacks are used,
the signal is only output from the
phone jacks.
A
PHONES Jack
Connects a pair of headphones to this
jack. The PHONES jack outputs the same
signal as the STEREO OUT jacks.
5 Level
indicator
6
OUT LEVEL
Playback
control
AUDIOGRAM 3 Owner's Manual
Pin-type
Adjusts the
monitor level.
Output
19