Sealey GSS150815G Instructions Manual page 7

Step 2: Assemble the rear wall panels.
You will find it easier to assemble your shed using sawhorses with timber studs attached
(timber needs to be the same length as the shed (1.5 M) or alternatively, a trestle table.
Place 14N and 11U the sheeting on your worktable and join together with the self-tapping
screws per the diagram.
Now fit 39C top channel and 39D bottom channel to the sheeting by tapping it in ( diagram
A ) or sliding it in. ( diagram B ) Be noted that the small lip of the channel is always facing
out. This is to ensure that rainwater cannot build up inside your shed.
Original Language Version GSS150815G | Issue 2 (I) 21/04/17
© Jack Sealey Limited