b) Select the Support Center tile.
c) On the Support Resources tab, locate and select the Storage Array Profile link.
d) Type feature pack submodel ID in the text box, and click Find.
e) Locate the feature pack submodel ID for the starting configuration.
3. Using the feature pack submodel ID, locate the corresponding Controller submodel ID for the starting
configuration and find the Feature Activation Code for the desired ending configuration within the
following table. Then, copy that Feature Activation Code to a text file.
Note: If you are not using the IB HIC, you can ignore the HIC Ports column in the following tables:
Table 1: Encryption Capable Feature Activation Codes
Starting configuration
Controller
submodel ID
443
444
448
Note: If your controller submodel ID is not listed, contact
4. In System Manager, locate the Feature Enable Identifier.
a) Go to Settings > System.
b) Scroll down to Add-ons.
c) Under Change Feature Pack, locate the Feature Enable Identifier.
d) Copy and paste this 32-digit number to a text file.
HIC ports
Controller
submodel ID
NVMe/FC
444
or
448
NVMe/RoCE
NVMe/FC
443
or
448
NVMe/IB
FC
443
444
Ending configuration
HIC ports
NVMe/IB
FC
NVMe/RoCE
FC
NVMe/FC
or
NVMe/RoCE
NVMe/FC
or
NVMe/IB
Fujitsu
Support.
| Host port protocol conversion |
Feature
Activation Code
63