Remove Dimms - Fujitsu ETERNUS AB Series Hardware Maintenance Manual

Attention: To prevent degraded performance, do not twist, fold, pinch, or step on the cables.
4. Confirm that the Cache Active LED on the back of the controller is off.
5. Squeeze the handles on either side of the controller, and pull back until it releases from the shelf.
6. Using two hands and the handles, slide the controller canister out of the shelf. When the front of the
controller is free of the enclosure, use two hands to pull it out completely.
Attention: Always use two hands to support the weight of a controller canister.
7. Place the controller canister on a flat, static-free surface.
What to do next
Go to Remove DIMM.

Remove DIMMs

If there is a memory mismatch present, you must replace the DIMMs in your controller.
Before you begin
• You have an ESD wristband, or you have taken other antistatic precautions.
Procedure
1. Locate the DIMMs on your controller.
| DIMMs |
28