Basic Procedure In Function - Yamaha P-155 Owner's Manual

Basic Procedure in Function

Follow the steps below to use the functions.
If you become lost while using a function, return to this page and read the basic procedure.
1.
Press the [TEMPO/FUNCTION] button to enter the
Function.
The [FUNCTION] indicator lights.
Desired function Sub- function
2.
Use the [TEMPO/FUNCTION –, +] buttons to select
the desired function from F1–F8.
When (that include the sub-functions) is selected, go on to step
When F1 or F6 is selected (these have no sub-functions), go on to step
3.
Press the [+/YES] button to enter the sub-function.
4.
Use the [TEMPO/FUNCTION –, +] buttons to select
the desired sub-function.
In the example below, the sub-functions of F4 (Split) are shown.
5.
Use the [–/NO] and [+/YES] buttons to change the
ON/OFF setting, select the type, or change the value.
The default setting (which is used when you first turn on the power to the
instrument) is recalled by pressing the
neously.
6.
Press the [TEMPO/FUNCTION] to exit the Function.
The indicator lights.
[TEMPO]
1 6 2 4
Desired
function
Sub-function
and
[–/NO] [+/YES]
5 3
.
3
5 .
buttons simulta-
Detailed Settings – [FUNCTION]
NOTE
Functions cannot be selected
during Demo/PRESET/USER/USB
song playback or in the File Oper-
ation and Record modes.
NOTE
To cancel the function in step 2, 3,
or 4, press the [TEMPO/FUNC-
TION –, +] button any time to exit
Function.
NOTE
After you select the function, the
current setting will be displayed
when the [–/NO] or [+/YES] but-
ton is pressed for the first time.
P-155 Owner's Manual
39