Table of Contents
Advertisement
Selecting & Playing Voices
Adding Variations to the Sound – [BRILLIANCE]/
[REVERB]/[EFFECT]/"Damper Resonance"
[BRILLIANCE]
You can use this control to adjust the brilliance of the tone and change the tonality to
suit your preference.
Bright tone
BRIGHT:
Standard tone
NORMAL:
MELLOW:
Soft and mellow tone
To select a brilliance type, press the
tor corresponding to the desired type lights (the indicator lights in sequence each time
you press the
[BRILLIANCE]
two adjacent indicators are lit, the type that is between the two indicated types is
selected. For example, when both NORMAL and MELLOW are lit, the brilliance set-
ting between NORMAL and MELLOW is selected.
[REVERB]
This control enables you to select various digital reverb effects for adding extra depth
and expression to the sound and creating a realistic acoustic ambience.
OFF:
When no reverb effect is selected, no REVERB indicator is lit.
ROOM: This setting adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
HALL 1: For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a small-size concert hall.
HALL 2: For a truly spacious reverb sound, use the HALL 2 setting. This effect simu-
lates the natural reverberation of a large concert hall.
STAGE: Simulates the reverb of a stage environment.
Pressing the
[REVERB]
The indicators light in sequence each time the
indicators are off, no effect is produced.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by using the
while holding the
The depth range is from 0 (no effect) through 20 (maximum reverb depth). The cur-
rent depth setting appears on the display while the
20
P-155 Owner's Manual
[BRILLIANCE]
button). Brilliance can be selected among five types. When
button repeatedly toggles the reverb on and off.
button. Default depth settings are different for each voice.
[REVERB]
[–/NO] [+/YES] buttons
button a few times until the indica-
button is pressed. When all
[REVERB]
[–/NO] [+/YES]
buttons
button is held.
[REVERB]
[BRILLIANCE] button
[EFFECT] button
[REVERB] button
NOTE
Default setting = NORMAL
NOTE
When the BRILLIANCE is set to
BRIGHT, the overall sound will be
slightly louder. If the MASTER
VOLUME is set at a high level the
sound may become distorted. If
so, lower the MASTER VOLUME
level.
NOTE
The default reverb type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
Releasing the [REVERB] button
changes the reverb type.
If you are changing the reverb
depth by holding the [REVERB]
button, releasing the [REVERB]
button will not change the reverb
type.
Hide quick links:
Advertisement
Table of Contents
