Yamaha AN1x Owner's Manual page 42

Base Unit And Length
The Base Unit parameter, together with the current
Tempo setting (see page 77) designates and completes
the timing resolution for the sequence pattern.
Pattern
Knob
Event 1-8 / 9 -16 Step Hold Bank No Base Unit
The Length parameter setting determines the length of
the sequence pattern based on number of steps. One
step is equivalent to one note, so based on the Base
Unit setting, you can also select odd-numbered steps to
create odd-numbered beats (such as setting the Length
to "3" for 3/4-time, or to "5" for 5/4-time), as well as
create completely unconventional rhythms.
Knob Pattern
1-8 / 9 -16 Step Hold Bank No Base Unit
Event
For more information about Base Unit and Length, see page 91. Also see the
section on Arpeggio Subdivide, which is similar to Base Unit, page 34.
Loop Type
The Loop Type parameter lets you determine the type of
loop cycle for the sequence pattern. The pattern always
loops, and you can designate it to loop either forward,
backward, or designate one of two alternating
forward/backward types.
SEQ
SEQ
Length LoopType Ctrl No Store EDIT /SETUP
SEQ
SEQ
Length LoopType Ctrl No Store EDIT /SETUP
42
Knob Pattern
Event 1-8 / 9 -16 Step Hold Bank No Base Unit
For more information about Loop Type, see page 91.
Scene Switch
The Scene Switch setting (in the VOICE ARPEGGIO/SEQ
menu) determines whether the Step Sequencer Pattern will
play Scene 1, Scene 2, or both Scenes. The current Scene
status will also affect how the Scenes play.
Control Number
The Control Number setting determines the type of
MIDI Control Change message which can be output by
each event upon sequencer play. Once the Control
Number is set, the Control Change event is selected
with (Knob) Event [UP/DOWN], and the value to be
output via each step is edited with the corresponding
CONTROL knob.
Knob Pattern
Event 1-8 / 9 -16 Step Hold Bank No Base Unit
For more information, see page 91. For more information about MIDI Control
Change messages, see page 109.
SEQ SEQ
Length LoopType Ctrl No Store EDIT / SETUP
SEQ
SEQ
EDIT /SETUP
Length LoopType Ctrl No Store