Stability Test; Testing Long-Term Stability - Huawei 5288 V5 Acceptance Manual

5288 V5 Server
Acceptance Guide
Procedure
Expected Results
Test Result
Remarks

4.4 Stability Test

4.4.1 Testing Long-Term Stability

Case No.
Test Objective
Test Networking
Diagram
Prerequisites
Issue 03 (2019-03-25)
1. Power on the server, and configure RAID 1 with two hard
disks.
2. Install an OS on the server.
3. Remove one of the hard disks, and check whether the OS is
still running properly.
4. Install a new hard disk of the same model, and check whether
RAID 1 is recovered automatically.
1. After the disk is removed, the OS is still running properly.
2. After the new hard disk of the same model is installed, the
RAID 1 group is rebuilt automatically.
1. The automatic recovery function of all Huawei RAID
controller cards is enabled by default only for new hard disks.
2. If an original card is used, the automatic recovery function
can be enabled by modifying RAID controller card
configuration items.
4.4.1
To test the server long-term stability performance.
See section
l The OS is operating properly.
l The GCC is properly installed.
l Non-uniform memory access (NUMA) and hyper-threading
in the BIOS are enabled.
Copyright © Huawei Technologies Co., Ltd.
2.1 Network Diagram.
4 Test Cases and Records
20