Querying And Changing The Ibmc Ip Address - Huawei 5288 V5 Acceptance Manual

5288 V5 Server
Acceptance Guide
Procedure
Expected Results
Test Result
Remarks

4.2.3 Querying and Changing the iBMC IP Address

Case No.
Test Objective
Test Networking
Diagram
Prerequisites
Issue 03 (2019-03-25)
4.2.3
To verify that the iBMC IP address can be successfully queried
and changed.
See section 2.1 Network
The server is powered on.
Copyright © Huawei Technologies Co., Ltd.
4 Test Cases and Records
1. Remove a power cable from a PSU to
simulate a PSU hardware error.
2. Log in to the iBMC WebUI, choose
Alarm and SEL > Current Alarms,
and check for PSU alarms.
3. Check whether the error code displayed
on the fault diagnosis LED of the front
panel correctly indicates the same error
as the alarm.
The fault diagnosis LED correctly indicates
the PSU hardware error.
l If the power cable of the left PSU is
removed, the fault diagnosis LED
displays "P01".
l If the power cable of the right PSU is
removed, the fault diagnosis LED
displays "P02".
Diagram.
14