Mitsubishi Electric 800 Series Instruction Manual page 27

Pr.340 setting Pr.79 setting
0
1
2
10
3, 4
*4
6
7
*1 Operation mode cannot be directly changed between the PU operation mode and Network operation mode.
*2 Switching between the PU and NET operation modes is available with the key on the operation panel or the X65 signal.
*3 Refer to page 53,
*4 When Pr.79 = "6", Pr.128 to Pr.134 (PID control) are disabled. The switchover mode and the PID control are disabled, and the same
operation mode as when Pr.79 = "0" is selected.
26
INVERTER SETTING
Operation mode at power ON or
power restoration
NET operation mode
PU operation mode
NET operation mode
External/PU combined operation mode
NET operation mode
External operation mode
72 for a switching method from the network.
Operation mode switchover
Switching between the PU and NET operation mode is
*2*3
enabled.
Same as when Pr.340 = "0"
NET operation mode fixed
Same as when Pr.340 = "0"
Switching between the PU and NET operation mode is
*2*3
enabled while running.
Same as when Pr.340 = "0"