Operation Via Pg/Pc (B4) - Siemens SINUMERIK 840D sl Function Manual

NC/PLC interface signals (Z2)

19.3 Operation via PG/PC (B4)

DB31, ...
DBX61.1
Edge evaluation:
Signal state 1 or edge
change 0 → 1
Signal state 0 or edge
change 1 → 0
DB31, ...
DBX61.2
Edge evaluation:
Meaning
Signal state 1 or edge
change 0 → 1
Signal state 0 or edge
change 1 → 0
19.3 Operation via PG/PC (B4)
No signal descriptions required.
1022
Axis container rotation active
Signal(s) updated:
An axis container rotation is active for the axis.
An axis container rotation is not active for the axis.
Axis ready
Signal(s) updated:
The signal is processed on the home NCU in the NCU link grouping.
The home NCU is the NCU to which the axis is physically connected.
Axis is ready.
Axis is not ready.
This status will be set when the channel, the operating modes group or the NCK have
generated the alarm "not ready".
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions