Mixing Console; Part Settings - Yamaha 9000 Pro Owner's Manual

Mixing Console

Mixing Console
A full-screen mixing console which provides access to a wide range of controls for each main and accom-
paniment part can be selected by pressing the [MIXING CONSOLE] button.
A simpler mixing console is available via the [MAIN MIXER] and the [PART ON/OFF] buttons described in
"Quick Guide" on pages 24 and 31.
Basic Procedure
1
Press the [MIXING CONSOLE]
button several times until the
desired parts are displayed.
2
Adjust the desired
parameter.
Select the desired menu.
Select the desired parameter.
Adjust the parame-
ter for each part.
The operations for each parameter corresponding to step #2 are covered in the follow-
ing explanations.

Part Settings

In addition to the keyboard-played voices, the 9000Pro features many different instru-
mental "parts," including those contained in the auto accompaniment, song playback,
and vocal harmony. See the next page for details.
144
Reference
See below.
Volume/EQ (see "Part Settings," page 145.)
Filter (see "Part Settings," page 145.)
Effect Depth (see "Part Settings," page 145.)
Effect Type (see "Effect Type Settings," page 146.)
Tune (see "Part Settings," page 145.)
Master EQ (see "Master Equalizer Settings," page 147.)
You can use the data dial to adjust the parameter.
First, select the desired part by pressing the any of the [1]~[8]
buttons and then rotate the data dial to adjust the parameter.
M A I N
MIXER
PART
ON/OFF
Refer to the Quick Guide
PART
on pages 24 and 31.
Pressing the [MIXING CONSOLE] button alter-
nates among the displays as listed below.
All parts (see below)
Accompaniment parts
Voice (see "Part Settings," page 145.)
Line Out (see "Line Out Settings," page 148.)
Select the desired menu.
Select the desired parameter.
Song tracks 1~8
Song tracks 9~16
• You can also select the desired
menu by pressing the [NEXT]
or [BACK] button.
• You can change the value of all
parts simultaneously. To do
this, press any of the LCD
[1]~[8] buttons or rotate the
data dial while holding the cor-
responding LCD button
([A]~[J]).