Yamaha 9000 Pro Owner's Manual page 13

PHONES jack MIC/LINE IN jack
A standard pair of The 9000Pro includes a
stereo headphones microphone/line input jack
can be plugged in which is compatible with
here for private virtually any standard
practice or late-night microphone or line-level
playing. Use the source, accepting either
[MASTER VOLUME] 1/4" phone plugs or XLR
control to adjust the connectors. The micro-
volume of the head- phone or line input can be
phone sound. used with the 9000Pro's
vocal harmony function.
An optional Yamaha
FC7 Foot Controller
connected to this jack
can be used to con-
trol volume and a
range of other impor-
tant functions.
Refer to page 159.
One or two optional
Yamaha FC5 foot-
switches connected to
these jacks can be used
to control sustain and a
range of other important
functions.
Refer to page 160.
• The MIC/LINE jacks can be used with either 1/4" phone plugs
or XLR connectors; however, they are special differential
input connectors. For phone plugs, the tip and ring of the
plug correspond to "+" and "-," respectively.
Because of this arrangement, connecting a stereo signal
(such as from a CD player) with a stereo phone jack to the
9000Pro results in the left and right signals cancelling each
other out. To properly connect a CD player or other stereo
source, make sure to use a mono input, either left or right, or
a mix of the stereo signal (pages 32, 80).
Computer
(with music software)
Refer to page 172.
MFC10
The sophisticated MIDI func-
tions give you powerful tools to
expand your music performance
and creation possibilities.
Refer to page 168.
Rear Panel & Connections
Rear Panel & Connections
This SCSI-2 50-pin connector (D-sub,
half-pitch) can be used to connect to an
external SCSI data storage device —
allowing you to conveniently save and
store large quantities of data.
Refer to page 150.
• Depending on the SCSI device, you may
need a special connecting cable or adap-
tor to connect the device properly to the
9000Pro. Make sure to confirm the con-
nection configuration of both the
9000Pro and the SCSI device before
purchasing the device.
• The SCSI ID number of the 9000Pro is
fixed at 7. Make sure to set the ID num-
ber of the external SCSI device to a num-
ber other than this (i.e., 0 - 6).
[VIDEO IN]
Television
You can connect the 9000Pro to a television or
video monitor to display the lyrics and chords in
your song data on a larger screen.
Refer to page 165.
• The 9000Pro's default setting for the external televi-
sion/video monitor signal is "PAL." Depending on your
particular locale, the standard may be different and the
setting should be changed accordingly. (For example,
NTSC is generally used in North America.) Check the
standard used by your television or video monitor, and
if it is not PAL, change the setting in the VIDEO OUT
display to "NTSC" (page 165).
An optional lamp
can be con-
nected to the
9000Pro. This is
especially conve-
nient when using
the 9000Pro in
situations of low
available light.
See page 15 for
details.
13