6. Remove the screws for combining cabinets
and cabinet connecting kits from the PDC top.
1. PDCs need to be combined at both the side and top. A PDC and a UPS cabinet need to be
combined only at the top.
2. The cabinet connecting kits are installed near the front and rear doors.
3. Ensure that both the vertical deviation and the distances between cabinets are within 3 mm
after the cabinets are combined.
Installing the PDC Bottom Sealing Plates
1. Remove one ground cable from the cabinet
front and rear doors respectively.
2. Remove the screws from the front and rear
door sills and buckles.
3. Remove the front and rear door sills and
buckles by pulling them upwards in a tilted
way.
7. Secure the PDCs using screws removed in
step (1) and step (6).
4. Remove the front and rear door sill
supports and fasteners.
10