Do you have a question about the Wave Radio and is the answer not in the manual?
Questions and answers
Lee Cardice
February 15, 2025
Assistance in repair of the power supply
2 comments:
Mr. Anderson
February 15, 2025
To repair the power supply for a Bose Wave Radio, particularly if experiencing the "Please Wait" error, follow these steps:
1. Identify the Model: Ensure you are working on the correct model, such as the Bose Wave Radio AWRCC1.
2. Disassemble the Unit: - Remove five Phillips head screws from the bottom. - Carefully separate the top and bottom sections.
3. Replace the Capacitors: - Locate the main board. - Replace all electrolytic capacitors, including smaller ones like the 0.47 microfarad capacitors near the power transistor.
4. Reassemble the Unit: - Secure all components back in place. - Reattach the casing and screws.
5. Test the Radio: Power it on to check if the issue is resolved.
These steps should restore functionality by addressing faulty capacitors in the power supply.
This answer is automatically generated
Joe
March 11, 2025
@Lee Cardice I preset my Bose radio to turn on at a set time. How do I delete this programing
David l Satterthwaite
February 17, 2025
How do you shut the alarm so that won't buzz?
1 comments:
Mr. Anderson
February 17, 2025
Press the "On/Off (Stop Alarm)" button to stop a sounding alarm and reset it for the next day. Alternatively, press "Alarm On/Off" to turn the alarm off completely. The alarm is off when the alarm time is not visible in the upper right-hand corner of the display.
This answer is automatically generated
Kelly Merrill
March 9, 2025
i have the Bose wave system.serial #033976c43155860ac. i have misplaced the remote to this player. is there any way to run this player without the remote? i have searched the player and can find no other way. please help. thanks
1 comments:
Mr. Anderson
March 9, 2025
No, the Bose Wave Radio cannot be operated without the remote control. The unit does not have manual controls for basic functions like power and volume, making the remote essential for operation.
This answer is automatically generated
Neil Cameron
March 28, 2025
I want to stop my alarm from going on. It beeps and I don't want any beep, period. How do I ensure that the alarm is of and will sound no more. It was inadvertantly started in the first place.
1 comments:
Mr. Anderson
March 28, 2025
To turn off the alarm on your Bose Wave Radio and stop it from beeping, press the ON/OFF button once. This stops the alarm, but the alarm indicators stay lit, meaning the alarm is set to repeat the next day.
Page 1
® ® The Bose Wave Radio Owner’s Guide January 7, 2002 AM149204_02_V.pdf...
Page 2
• Consult the dealer or an experienced radio/TV technician for help. Please read this owner’s guide ® ® The Bose Wave radio is carefully engineered to provide sound quality far beyond other radios. This guide will help you set up and operate your radio properly.
The unit may fall, causing serious injury to a person or damage to the unit. For advice on use of a particular cart, stand, tripod, bracket, or table, contact Bose 10. Avoid Power Lines – Do not install external antennas near overhead power lines or other electric light or power circuits, nor where an antenna can fall into such circuits or power lines.
Contents Where to find... Safety Instructions ... 3 For your safety ... 3 Setting Up ... 5 Unpack the carton ... 5 Install the batteries ... 5 Connect the power cord and antennas ... 6 The remote control ... 7 The Display ...
Unpack the carton (see Figure 1) Carefully unpack the carton. Do not attempt to use the Wave aged. Instead, repack the carton and notify Bose ® Place the Wave radio on a table or other flat surface. Locate the FM and AM antennas, the power cord, and the AA batteries.
Setting Up Connect the power cord and antennas Find the jacks on the back of your radio (see Figure 3). Unwind all cords. Connect the power cord 1. Plug the small end of the power cord into the power jack. 2.
Maxell CR2025 battery. It may be available from a retail dealer or electronics store. If you have difficulty finding a replacement battery, contact Bose Corporation directly (see ® “Customer service” on page 13). Figure 4 Push the security lock to the right with the tip of a ball point pen.
The Display How to read the clock display [Numeric display] – Shows current time, wakeup time, time remaining before automatic shutoff, station frequency, or volume setting. SLEEP How to read the radio display Lights to show selection. Lights while AUX FM receiving FM STEREO stereo broadcast.
Radio functions 3 ways to ON/OFF turn on/off AM/FM To shut off SLEEP/SNOOZE automatically ON/OFF To select AM or FM AM/FM radio To adjust volume VOLUME To display the station TUNING To tune in a station TUNING To seek a station TUNING To preset...
Functions Clock functions To set CLOCK clock TUNING To set ALARM Alarm 1 TUNING To set ALARM Alarm 2 ALARM MODE TUNING To use ON/OFF Auto Reset To check ALARM Alarm 1 To check ALARM Alarm 2 ALARM MODE TIME ALARM TUNING TIME ALARM...
Page 11
Clock functions (continued) To choose the alarm ALARM MODE sound To set the volume of the alarm VOLUME ON/OFF To snooze SLEEP/SNOOZE To stop the alarm ON/OFF ALARM MODE To wake ALARM to your favorite station PRESET STATIONS Alarm operation during a power ON/OFF...
® Lifestyle music system. Most audio cables are available at electronics stores. Or call Bose. Most audio cables are color coded. Match the red plugs to the right (red) jack and the black or white plugs to the left (white) jack.
If necessary, you may use a soft-bristled attachment to gently vacuum the front of the radio. Customer service 1-800-637-8781 8:30 a.m. to 9 p.m. ET Canada 1-800-444-BOSE (1-800-444-2673) 9 a.m. to 5 p.m. ET Limited warranty What is covered: All parts defective in material or workmanship. AM149204_02_V.pdf...
What you must do: We recommend that you return unit with original proof of purchase directly to the BOSE factory. But you can also return unit personally with original proof of purchase to an authorized BOSE dealer or service agency.
• High performance stereo tuner allows 6 AM and 6 FM station presets • Automatic protection circuitry prevents speaker damage from excessive volume • Dual independent alarms let you set two wakeup times • Credit card size remote offers convenient program control Size Dimensions •...
Need help?
Do you have a question about the Wave Radio and is the answer not in the manual?
Questions and answers
Assistance in repair of the power supply
To repair the power supply for a Bose Wave Radio, particularly if experiencing the "Please Wait" error, follow these steps:
1. Identify the Model: Ensure you are working on the correct model, such as the Bose Wave Radio AWRCC1.
2. Disassemble the Unit:
- Remove five Phillips head screws from the bottom.
- Carefully separate the top and bottom sections.
3. Replace the Capacitors:
- Locate the main board.
- Replace all electrolytic capacitors, including smaller ones like the 0.47 microfarad capacitors near the power transistor.
4. Reassemble the Unit:
- Secure all components back in place.
- Reattach the casing and screws.
5. Test the Radio: Power it on to check if the issue is resolved.
These steps should restore functionality by addressing faulty capacitors in the power supply.
This answer is automatically generated
@Lee Cardice I preset my Bose radio to turn on at a set time. How do I delete this programing
How do you shut the alarm so that won't buzz?
Press the "On/Off (Stop Alarm)" button to stop a sounding alarm and reset it for the next day. Alternatively, press "Alarm On/Off" to turn the alarm off completely. The alarm is off when the alarm time is not visible in the upper right-hand corner of the display.
This answer is automatically generated
i have the Bose wave system.serial #033976c43155860ac. i have misplaced the remote to this player. is there any way to run this player without the remote? i have searched the player and can find no other way. please help. thanks
No, the Bose Wave Radio cannot be operated without the remote control. The unit does not have manual controls for basic functions like power and volume, making the remote essential for operation.
This answer is automatically generated
I want to stop my alarm from going on. It beeps and I don't want any beep, period. How do I ensure that the alarm is of and will sound no more. It was inadvertantly started in the first place.
To turn off the alarm on your Bose Wave Radio and stop it from beeping, press the ON/OFF button once. This stops the alarm, but the alarm indicators stay lit, meaning the alarm is set to repeat the next day.
This answer is automatically generated