Update - Owon ODP Series User Manual

Save
Settings
Auto
Record Record
View
Record
Data view
Output Set
Program
Data
process

4.9.3 Update

Use the front-panel USB port to update your instrument firmware using a USB memory
device.
USB memory device requirements: This instrument only supports a USB memory device
with a FAT32 file system. If the USB memory device doesn't work properly, format it into
the FAT32 format and try again; or try another USB memory device.
Caution: Updating your instrument firmware is a sensitive operation, to
prevent damage to the instrument, do not power off the instrument
or remove the USB memory device during the update process.
To update your instrument firmware, do the following:
(1) Press the Utility key, turn the knob to select [Info]. The Info sub menu is selected.
You can view the model and firmware version.
(2) From a PC, visit
www.owon.com.cn
version. Download the firmware file. The file name must be ODPFW.upp. Copy the
firmware file onto the root directory of your USB memory device.
4.Front Panel Operation
Stop Bits
IP
Subnet Mask
LAN Set
Gateway
Port
Memory
Save
Memory
Interval
Points
Record
Status
Read
Memory
Display
Memory
Cycle Mode
Start Point
Stop Point
Graph
process
and check if the website offers a newer firmware
18
1
192.168.001.099
255.255.255.000
192.168.001.001
3000
Internal
CH1
Internal
1
1000
CH1
CH1
Internal
Graph
Internal
Order
1
100
SET: VOLT,CURR
READ: VOLT,CURR