TREND STAIR Series Manual
  1. Manuals
  2. Brands
  3. TREND Manuals
  4. Tools
  5. STAIR Series
  6. Manual

TREND STAIR Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Dear Customer
Thank you for purchasing this Trend product, we
hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
CONTENTS
TECHNICAL DATA _____________________1
SAFETY PRECAUTIONS ______________2-3
ITEMS ENCLOSED ____________________4
ASSEMBLY __________________________5
DESCRIPTION OF PARTS ______________5
PARTS OF STAIRCASE ______________6 - 7
STAIR/A _____________________________8
- Setting up the Router __________________8
- Cutting the String ____________________10
OPERATION
STAIR/B ____________________________11
- Setting out the String _________________11
- Fitting the Template __________________11
- Cutting the String ____________________11
MAINTENANCE ______________________12
GUARANTEE ________________________12
- STAIR/B ___________14
- STAIR/A ___________15
- STAIR/B ___________16
STAIR JIG

TECHNICAL DATA

STAIR/A
Tread thickness
Slider diameter
Nosing adjustment
Weight
STAIR/B
Tread thickness
Riser thickness
Guide bush diameter
Weight
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Refer to the instruction manual of
your power tool.
This unit must not be put into service until it has
been established that the power tool to be
connected to this unit is in compliance with
98/37/EC (identified by the CE marking on the
power tool).
INTENDED USE
The jig is intended to be used to rout stair
trenches in wood using a 1/2" shank portable
plunge router with a suitable router cutter fitted.
☎
If you require further safety advice,
technical information or spare parts,
please call our technical support
department on 01923 224681 or
visit www.trend-uk.com
-1-
Closed Riser
22mm - 32mm
30mm
16mm - 19mm
6.17kg
Open Riser
32mm
16mm
24mm
6.3kg

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STAIR Series and is the answer not in the manual?

Questions and answers

Related Manuals for TREND STAIR Series

Summary of Contents for TREND STAIR Series

  • Page 1: Table Of Contents

    STAIR JIG Dear Customer TECHNICAL DATA Thank you for purchasing this Trend product, we STAIR/A Closed Riser hope you enjoy many years of creative and productive use. Tread thickness 22mm - 32mm Slider diameter 30mm Please remember to return your guarantee card within 28 days of purchase.

  • Page 2: Safety Precautions

    STAIR JIG SAFETY and balance at all times. Do not use recommended when working awkward or uncomfortable hand outdoors. Wear protective hair WARNING: positions. covering to contain long hair. Observe the safety regulations in the 17. Don’t abuse the cable. Never carry 5.
  • Page 3 15. All fastening screws and nuts should be adhered to. Recommended speeds 4. When using a template guide bush, be tightened using the appropriate are shown in the Trend Routing ensure there is sufficient clearance spanner or key and to the torque Catalogue and/or website.

  • Page 4: Items Enclosed

    STAIR JIG ITEMS ENCLOSED For STAIR/A only For STAIR/B only...

  • Page 5: Assembly

    STAIR JIG ASSEMBLY & DESCRIPTION OF PARTS STAIR/A For STAIR/A and STAIR/B STAIR/B A. Main board (STAIR/A or STAIR/B) B. Handle for clamp C. Hex nut for clamp D. Clamp assembly E. Aluminium clamp bar F. Barrel nut for clamp bar G.

  • Page 6: Parts Of Staircase

    STAIR JIG PARTS OF A STAIRCASE be between 840mm and 1000mm high and give firm support. Going It is a Building Regulation requirement that no The going of a step is measured on plan openings in any balustrades should allow the between the nosing of its tread and the nosing passage of a sphere of 100mm in diameter, that of the step above or landing above or, as the...
  • Page 7 STAIR JIG Design Floor The number of steps is governed by the floor to floor height which is usually fixed, and the flight going space available. Alterations may present Floor or landing difficulties but in new buildings the flight going Headroom space is usually flexible.

  • Page 8: Operation Stair/A

    STAIR JIG OPERATION and tighten collet nut. Place the line-up bush over the end of the line-up pin with router still inverted, plunge the router base down until the STAIR/A - line-up bush and pin appears through the central aperture in the router base. Then lock the CLOSED RISER plunge.

  • Page 9: Setting Up Template On The String

    STAIR JIG Setting the Template on the String The template is placed face down on the string, clamp bar side downwards and on the marked out string. The clamp bar is fully adjustable, this is carried out by loosening the barrel nuts (using the two 13mm A/F spanners) on the upper most side, and moving the bar.

  • Page 10: Cutting The String

    STAIR JIG Cutting the String Follow instructions to avoid breakout It is important to cut the risers first to avoid break here out on the short grain of the string. The router will need to be moved backwards and forwards along the template so as to let the shavings free themselves from the housing, also the middle/riser will need to be cut away.

  • Page 11: Stair/B

    STAIR JIG STAIR/B - OPEN RISER 24mm guide bush can now be fitted using the two countersunk machine screws. The Routing Jig for Open Staircases differs from 7. Remove the line-up pin and keep safely for the one designed for closed staircases. future use.

  • Page 12: Maintenance

    STAIR JIG MAINTENANCE The jig has been designed to operate over a long period of time with a minimum amount of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. ■ Cleaning Regularly clean the jig and remove resin build up on all threads.

  • Page 13: Spare Parts - Spare Parts List - Stair/A

    STAIR JIG STAIR/A - SPARE PARTS LIST V4.0 01/2006 Qty. Desc. Ref. Main Board for STAIR/A WP-SJA/01 Handle for Clamp Plastic M12 WP-SJ/02 Nut Hex M12 WP-NUT/12 Clamp Assembly WP-SJ/04 Aluminium Clamp Bar WP-SJ/05 Barrel Nut M8 WP-SJ/06 Washer 8.5mm x 15.8mm x 12.7mm WP-WASH/15 Stud M8 x 75mm WP-SJ/08...

  • Page 14: Stair/B

    STAIR JIG STAIR/B - SPARE PARTS LIST V4.0 01/2006 Qty. Desc. Ref. Main Board for STAIR/B WP-SJB/01 Handle for Clamp Plastic M12 WP-SJ/02 Nut Hex M12 WP-NUT/12 Clamp Assembly WP-SJ/04 Aluminium Clamp Bar WP-SJ/05 Nut Barrel M8 WP-SJ/06 Washer M8 WP-WASH/15 Stud M8 x 75mm WP-SJ/08...

  • Page 15: Spare Diagram - Stair/A

    STAIR JIG STAIR/A - SPARE PARTS DIAGRAM V4.0 01/2006 -15-...

  • Page 16: Stair/B

    STAIR JIG STAIR/B - SPARE PARTS DIAGRAM V4.0 01/2006 -16-...
  • Page 17 Web: __________________www.trend-uk.com RECYCLABLE © Copyright Trend 2008. No part of this publication may be reproduced, stored or transmitted in any form without prior permission. Our policy of continuous improvement means that specifications may change without notice. Trend Machinery and Cutting Tools...
  • Page 18 STAIR JIG...

This manual is also suitable for:

Stair/aStair/b

Table of Contents