Removing Door Window - Skoda OCTAVIA Workshop Manual
Hide thumbs
Also See for OCTAVIA:
- Owner's manual (348 pages) ,
- Operating instructions manual (264 pages) ,
- Workshop manual (208 pages)
Table of Contents
Advertisement
OCTAVIA
Edition 08.96
S00.5118.50.20
Rear Door / Door Components
Removing door window
Remove door trim panel ⇒ page 70-5.
-
Detach insulation sheeting ⇒ page 70-6.
-
-
Pull inner window slot seal off the flange.
-
Lower door window.
K -
Take out screws -1- and -2- for window guide
-3- and pull window guide off the triangular
window -arrow-.
-
Take out window guide.
-
Close door window sufficiently until the
clamping jaws are positioned in the assembly
openings -arrows-.
K -
Slacken hexagon nuts -1- and press clamp-
ing jaws apart.
-
Pull door window -2- up and lift it out of the
window slot.
58
------------ 58-3 ------------
- Quick Links:
- Vehicle Identification Data
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the OCTAVIA and is the answer not in the manual?
Questions and answers
Brake pipe lines
The brake pipe lines for a Skoda Octavia include:
1. Brake Line Rear Right 4x4 – Brake tube for disc brakes, from the brake hose to the brake caliper (Part number: 1J0 611 764 L).
2. Brake Pipe (Left Front) – Brake tube from the hydraulic system to the brake hose (Part number: 1J0 614 723 K).
3. Brake Pipe (Left Front, Alternative) – Another version of the brake tube from the hydraulic system to the brake hose (Part number: 1J0 614 723 L).
4. Steel Braided Brake Lines – High-quality, durable brake lines with an 8-ply woven steel braid, TÜV tested, and ready to install for the Skoda Octavia III 2.0 TSI RS.
5. HEL Stainless Steel Braided Brake Lines – Customizable brake lines for Skoda Octavia 1U 1.9 TDi (1998-2005), available in different configurations.
These lines connect the braking system components, ensuring safe and efficient braking performance.
This answer is automatically generated