Husqvarna S 13 Operator's Manual page 17

machines rating plate, including extension
cords.
Grounding instructions
WARNING: The dust extractor must be
grounded. If it should malfunction or
breakdown, grounding provides a path of
least resistance for electric current to reduce
the risk of electric shock. The dust extractor
is equipped with a cord having an
equipment-grounding conductor and
grounding plug. The plug must be inserted
into an appropriate outlet that is properly
installed and grounded in accordance with
all local codes and ordinances.
To start and stop
Use the switch to start the dust extractor.
Start switch Models with
automatic start
Black - 3 step 0: Motor OFF
I: Motor ON
II: Automatic
start
Red - 2 step
Automatic start function
When you use the dust extractor together with another
machine, there is an electrical outlet on the dust
extractor. Connect the machine to this outlet. Then when
you start it up the dust extractor will also start after
approximately 1-2 seconds. When you turn it off, the
dust extractor will continue to run for approximately 10
seconds to empty the hose and then stop.
896 - 004 -
To assemble a new Longopac dust bag
Note: The dust extractor has Longopac system.
1. Put the dust bag in the holder.
2. Attach the dust bag holder to the container by
Models without
automatic start
0: Motor OFF
I: Motor ON
3. Pull the bag up from the bag holder and put it around
WARNING: Always clean the prefilter before
change of bag collection system.
twisting it on to the holding pins.
the container.
17