Related Manuals for Husqvarna T Series
Summary of Contents for Husqvarna T Series
- Page 1 Operator s manual T-Line Dust Extractor T8600 PROPANE Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
-
Page 2: Type Plate
The dust extractor T8600 PROPANE can only be used with dry, non-explosive material. Husqvarna will not be held responsible if the air cleaner is used for other applications or has been used in ways other than those outlined in this instruction manual. -
Page 3: Product Overview
Product overview Stop button (behind the hatch) Safety Instructions Warning Cutting, especially when DRY cutting, generates dust that comes from the material being cut, which frequently contains silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. - Page 4 Handling Warning Running an engine in a confined or badly ventilated area can result in death due to asphyxiation or • carbon monoxide poisoning. Outdoor use or in well ventilated areas only. • Warning Make sure the assembly area is firm, so the dust extractor does not tip over. Risk of personal and •...
-
Page 5: Operation
Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the machine, • especially the opening for the cooling air. Before moving the machine from the working area, the machine must be cleaned. Furthermore, the inlet •... - Page 6 Function The machine is used for sucking and separating dry, non-combustible dust with an explosion limit value of >0.1mg/m The engine is started by the key switch. When the engine has warmed up and is running at idle, the clutch is engaged by a second switch.
-
Page 7: Filter Change
1 ea Warranty All Husqvarna devices and accessories have a 24-month factory warranty for material and manufacturing defects. Do not attempt to repair the suction apparatus without the consent of the manufacturer. The warranty does not cover defects which are the result of normal wear and tear, negligence, defective use, unauthorised repair or the suction apparatus being connected to the incorrect voltage. -
Page 8: Problem Solving
Problem solving The dust extractor T8600 PROPANE are designed and manufactured for severe environments and tasks, but the user must note that the machine components must be protected from knocks and blows. Filter and sealing connections are carefully chosen for the environment of the operator. Therefore, the machine must be handled with care if it is to work correctly for many years. -
Page 9: Technical Data
TECHNICAL DATA T8600 Propane POWER 18 HP / 13,4 kW POWER SUPPLY Kawasaki Propane AIR FLOW (CFM) (m3/h) MAX VACUUM (H2O Inch) (Kpa) PRIMARY HOSE 33 feet x ∅ 3” 10 M x ∅ 76 mm INLET ∅ 3“ ∅ 76 mm FINE FILTER (sock filter) 99.9% at 0.3 microns Filter area 2,3... - Page 10 Notes ______________________ ______________________ ______________________ ______________________ ______________________ ______________________ ______________________...
- Page 11 www.husqvarnacp.com Original instructions 1158781-26 2017-04-27...