Attach Magnetic Hold-Down Brackets (Optional) - Hunter Douglas Silhouette Installation Operation Care

INSTALLATION

Attach Magnetic Hold-Down Brackets (Optional)

Lower the shading, keeping the vanes closed.
■
Place the magnetic hold-down brackets onto the bottom rail just inside
■
the end caps, oriented as shown.
Hold the brackets while opening and closing the vanes. (It may be
■
necessary to have someone assist you.) Adjust the brackets to the best
overall position.
Mark the screw locations using one of the mounting options shown
■
below.
The screw should be placed in the middle of the channel. This will
➤
allow for adjustment.
Outside Mount
Inside Mount
Drill the screw holes using a
■
Attach the hold-down brackets to the mounting surface
■
using the screws provided.
If necessary, adjust the bracket height by loosening the
■
screw and sliding the bracket up or down.
16
Preferred
Preferred
/ " drill bit.
3
32
Hold-Down
Bracket
Alternate
Alternate
Adjust the
bracket
up or down
using the
channel.
Bottom
Rail