Table of Contents
Advertisement
IV. Mounting Cove
As shown in Figure 2-3, place the cover and bottom together, plug the two
clips into the white socket on the PIPU, and then fix the cover and bottom by
four tapping screws (2.9*9.5).
2.2 Uninstalling FWT
Take out the battery and UIM card first, and then uninstall the FWT as follows.
1)
2)
3)
4)
5)
(1) ST2.9*9.5 tapping screw
Figure 2－3 Cover installation
Unscrew the cover and bottom. Open the cover.
Plug out the clips between the cover and the PIPU.
Unweld the antenna cable from the PIPU.
Unscrew the PIPU form the bottom.
Unweld the TCPU form the bottom
30
Advertisement
Table of Contents
