Storage; Hard Drive Or Solid-State Drive Not Recognized - HP ZBook Fury 17 G7 Maintenance And Service Manual

Storage

Use this information to troubleshoot storage issues.
NOTE:
Back up all critical data before troubleshooting the drive.
●
Before contacting support, HP recommends that you run a drive (HDD, SSD, M.2 drive) test using the HP PC
●
Hardware Diagnostics (UEFI) tool on the suspected failed drive.
Diagnose the hard drive using BIOS, Diagnostics built in the shipping image, or an external USB
●
(http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?
jumpid=va_r602_us/en/any/pps/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/dt).
● HP recommends the drive quick test to quickly (less than 10 minutes) identify the malfunctioning drive. If
the issue still exists, run Extensive Test (more than 2 hours, or loop mode, which runs until an error occurs).
If any test fails, record failure code and contact support for instructions about how to order a replacement
●
hard drive.
If all of the tests pass, the hard drive is not damaged. As a rule, HP will not replace a hard drive under
●
warranty that does not fail the HP Hard Drive Self-Test.
If there is no physical problem with the hard drive (or memory), then try reinstalling the Windows operating
●
system to troubleshoot the problem.

Hard drive or solid-state drive not recognized

Use this information to troubleshoot storage device issues.
ENWW Common issues and possible solutions 159