Inserting A Sim Card In The Service Bay - HP ZBook Fury 17 G7 Maintenance And Service Manual

the repair and potentially result in a billable event. If the computer does not boot or the customer is not able to
check in and disable the feature, continue with normal procedures to replace the system board.

Inserting a SIM card in the service bay

To insert a SIM card, follow these steps.
1. Turn off the computer by using the Shut down command.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the service door toward you.
6. Remove the service door, and then remove the battery.
For steps on removing the service door and battery, see
on page
16 Chapter 2 Components
41.
Service cover on page 40 and Battery
ENWW