Safety - Kenmore 106.89592100 Technical Education

DIAGNOSTICS & TROUBLESHOOTING

Safety

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
When performing live voltage measurements, you must do the following:
Verify the controls are in the off position so that the appliance does not start when energized.
Keep other people a safe distance away from the appliance to prevent potential injury.
5-2
n
Voltage measurement safety information
DANGER
Electrical Shock Hazard
Only authorized technicians should perform
diagnostic voltage measurements.
After performing voltage measurements,
disconnect power before servicing.
Failure to follow these instructions can result in
death or electrical shock.