SPECIFICATIONS
Name
Model
External dimensions
Internal dimensions
Interior volume
Exterior
Interior
Outer door
Inner door
Tray
Access port
Insulation
Heating system
Heater
Humidifying system
Temperature controller
Temperature display
CO
controller
2
CO
density display
2
Air circulation
Air filter
UV lamp
Water level sensor
Alarm
Remote alarm contact
CO
inlet connection
2
CO
inlet pressure
2
Accessories
Weight
Optional accessory
Note: Design or specifications will be subject to change without notice.
MCO-18AC
3 trays made of stainless steel containing copper
W450 x D450 x H12 (mm), Maximum load; 7 kg/tray
Inner diameter; 30 mm, On the back side
Rigid polyurethane foamed-in place
DHA system (heater jacket + air jacket system)
Natural evaporation with humidifying pan
ON-OFF control system/TC sensor
0.3μm, Efficiency; 99.97% or more
-----
-----
-----
Automatic set temperature alarm, Automatic set CO
Upper limit temperature alarm, various gas/sensor/heater alarms
Allowable contact capacity: DC 30 V, 2 A
4 to 6 mm diameter tube can be connected
0.03MPaG (0.3kgf/cm
3 trays, 3 sets of tray support, 1 gas tube, 1 humidifying pan,
Stacking plate A and B, 2 protective stickers, 2 tube bands
92 kg
UV system kit (MCO-18UVS3)
UV replacement kit (MCO-20UV), 4-20mA Interface(MCO-420MA, USA only)
Gas pressure regulator (MCO-100L)
Extra tray (MCO-47ST) including 2 tray supports, Half tray (MCO-25ST)
Automatic CO
cylinder changeover system (MCO-21GC), Roller base (MCO-18RB)
2
RS232C/RS485 Interface (MTR-480), Ethernet (LAN) Interface (MTR-L03)
SANYO Data acquisition software (MTR-5000)
CO
incubator
2
W620 x D710 x H900 (mm)
W490 x D523x H665 (mm)
170 L
Painted steel
Stainless steel containing copper
Painted steel
Tempered glass
282 W
PID control system
Digital display
Digital display
Fan assisted
4W X 1 (ozone-free emission)
Low humidifying water alarm
2
G, 4.3psiG)
42
MCO-18AC(UV)
Optical type
UV lamp failure alarm
density alarm
2
93 kg
Standard equipment