Performance Inspection - Huawei MU509 Series Acceptance Inspection Manual

HUAWEI MU509 Series HSDPA LGA Module
Acceptance Inspection Guide
Figure 2-8 MU509-c label 2



2.3 Performance Inspection

Testing software: HyperTerminal
Testing tools: serial port or USB cable, test fixture for modules, PC
The following is the procedure:
Step 1 Use serial port or the USB cable to connect the testing PCB to the PC.
Step 2 Open Run and input the path C:\Program Files\Windows NT, and hypertrm.exe will
be displayed as shown in the following figure. Double click hypertrm.exe to run
HyperTerminal.
Issue 01(2013-09-14)
Check whether the information on the label of an MU509 series module is consistent with
the corresponding labels shown in ‎ F igure 2-5 to ‎ F igure 2-8 . There are two kinds of labels
producted. The labels shown in ‎ F igure 2-5 to ‎ F igure 2-8 are the general version. If the label
is customized, see the approval sheet.
Use a 2D barcode scanner to read the 2D barcode and check whether the number read
from the barcode is consistent with the IMEI number printed on the label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Acceptance Inspection
10