CHAPTER 5 MECHANICAL CONSTRUCTION
C.
PCBs
1.
Removing the Saddle Stitcher
Controller PCB
1) Remove the PCB cover. (See II-A-6.)
2) Remove the four screws [1] and 14 con-
nectors [2] and take out the saddle stitcher
controller PCB [3].
5-32
[ 2 ] [ 2 ]
[ 2 ] [ 3 ]
[ 1 ]
[ 1 ]
[ 2 ]
Figure 5-235
[ 1 ]
[ 1 ]