5.
Removing the Transit Path
Assembly
1) Remove the two screws [2], and remove the
right cover [1].
2) Open the upper cover assembly [3], remove
the three screws [5], and remove the rear
cover [4].
3) Disconnect the three connectors [6], and
free the harness from the two harness stops
[7].
4) Remove the four screws [8] used to fix the
transit path assembly. (two screws in the
rear and two ones in the front)
5) Hold the transit path assembly with both
hands, and remove it as if to lift it to the
front.
CHAPTER 5 MECHANICAL CONSTRUCTION
[1]
[2]
Figure 5-128
[6]
Figure 5-129
[3]
[4]
Rear side
Front side
[5]
[8]
[7]
[8]
5-15