Removing The Grate-Shaped Upper Guide - Sharp AR-FN8 Service Manual

Note:
When installing the removed tray assembly
back to the finisher assembly, be sure to release
the tray lift motor gear clutch [1] with a
screwdriver or similar object when inserting
it. Take extra care during this operation.
6. Removing the Grate-Shaped
Upper Guide
1) Remove the rear cover. (See I-A-2.)
2) Release the tray lift motor gear clutch with
a screwdriver or similar object while sup-
porting the tray assembly, and gently lower
the tray assembly down to its lowest posi-
tion. (See Figure 4-108.)
3) Remove the slide guide [1].
4) Remove the five screws [2] (M4).
5) Remove the screw [3] (M3) and take out
the grate-shaped upper guide [4].
CHAPTER 5 MECHANICAL CONSTRUCTION
Figure 5-108
[2]
[3]
Figure 5-109
[1]
[4] [1]
[2]
5-5