Stoneridge SE5000-8 Workshop Manual page 44

Display Messages
Display
reminder
daily rest
reminder
weekly rest
Remote
Detection fault
Security
violation
Sensor
auth. failure
Sensor
auth. failure
Sensor
cable fault
Sensor
cable fault
Sensor
comms error
Sensor data
error
Sensor data
integrity error
Sensor
no acknowledge
Sensor
no answer
- 44 -
Description
Pre-warning
A reminder for the daily rest.
Pre-warning
A reminder for the weekly rest.
Fault
Cannot communicate with the Remote
Detection facility (DSRC)
Tampering with hardware has been
detected
Fault
The tachograph does not detect the
sensor. Related to the motion sensor.
Warning
No pulses received from motion sensor, but
encrypted data is received.Related to the
motion sensor.
Warning
Pulses received from motion sensor, but
encrypted data missing or mismatch.
Related to the motion sensor.
Fault
Motion sensor communication error.
Related to the motion sensor.
Warning
Signal failure between motion sensor and
tachograph. Related to the motion sensor.
Fault
Internal motion sensor error, stored data
integrity failure. Related to the motion
sensor
Fault
Motion sensor communication error.
Related to the motion sensor.
Fault
Motion sensor communication error.
Related to the motion sensor.
Action
Check the external Remote Detection facility
and the cables
Check for evidence of tampering with the unit.
Decommission and replace the tachograph.
The tachograph has to be decommissioned
and replaced.
Check motion sensor operation and all
wiring.
Check for evidence of tampering.
Pair the motion sensor and tachograph
again.
Perform a new calibration of the tachograph
system.
Replace the sensor if found faulty.
Check the motion sensor operation and
wiring.
Replace the motion sensor if necessary.
Check the motion sensor operation and
wiring.
Replace the motion sensor if necessary.
Check the motion sensor operation and
wiring.
Replace the motion sensor if necessary.
Check the motion sensor operation and
wiring.
Replace the motion sensor if necessary.
Check for evidence of tampering.
If the error remains active for no apparent
reason, decommission and replace the
tachograph.
Replace the motion sensor if necessary.
Check the motion sensor operation and
wiring.
Replace the motion sensor if necessary.
Check the motion sensor operation and
wiring.
Replace the motion sensor if necessary.