Stoneridge SE5000-8 Quick Manual

Default Activity key on/off
This setting gives the opportunity to preset an automatic activity change for
both driver and co-driver when switching the ignition key on or off (consult
relevant authority for national regulations).
1. Press the OK button.
Select Settings and press OK
2. Select Parameters and press OK
3. Select Default activ.key on or Default activ.
key off and press OK.
4. Select the preferred activity; No change,
Rest, Available or Work and press OK.
5. The following is displayed.
6. Press the Back button three times to return
to the standard display.
Daylight Saving Time
An automatic local time adjustment for summer and winter is automatically
prompted on the last Sunday in March and last Sunday in October, respectively.
1. Select YES to acknowledge or NO to cancel
the time change.
For full details on the SE5000-8 functionality
we refer to the Driver & Company Manual or
visit www.SE5000.com
SE5000-8, 104033P/01R01 EN
SETTINGS
Parameters
Default activ.
key on
Default activ.
key off
Changes
saved
New time?
YES
03:01
Company Quickguide
Display
Back button
Driver
card tray
Up/Down OK
button button
Note! Card handling and browse in menu is only possible when vehicle is not moving.
Insert the card
(always possible in standard menu and ignition ON)
1. Press and hold the driver or co-driver button until tray opens.
2. Insert the card with the chip facing upward.
3. Close the tray by pushing it gently forward.
1
Withdraw the card
(not possible in all menus)
1. Press and hold the driver or co-driver button until tray opens.
2. Press the card up slightly from underneath through the opening in the tray
or push the edge of the tray down until the card pops out.
1
STONERIDGE - EVERY ANGLE COVERED
Paper cassette
Co-driver
card tray
Driver Co-driver
button button
2 3
2