Getting Started - Lumie Bodyclock glow 150 Manual

4 ENG

Getting started

The ideal place for Lumie Bodyclock is on a bedside table near a mains
socket.
•
Connect the mains power adaptor to the socket in the base of the unit.
•
Plug into a mains power supply.
The display will flash until the current time is set:
Program
P
Bodyclock Glow 150 is preset with a 07:00 alarm time, 30-minute
sunrise and 30-minute sunset.
To use it with these settings see Using the sunrise alarm, page 10, and
Using the fading sunset, page 11.
To change the alarm time or any other settings read the following
sections.
The hours will flash.
•
- +
Use or to set the hours.
>
•
Press to confirm and continue.
The minutes will flash.
•
- +
Use or to set the minutes.
>
•
Press to confirm and exit to the current time.
Getting started