How To Use; Getting Started - Lumie Bodyclock Spark 100 Manual

4 ENG

Getting started

The ideal place for Lumie Bodyclock is on a bedside table near a mains
socket.
•
Connect the mains power adaptor to the socket in the base of the unit.
•
Plug into a mains power supply.
The display will flash until the current time is set:
Program
P
Lumie Bodyclock is preset with a 07:00 alarm time, 30-minute sunrise
and 30-minute sunset.
To use it with these settings see Using the sunrise alarm, page 9, and
Using the fading sunset, page 10.
To change the alarm time or any other settings read the following
sections.
The hours will flash.
•
- +
Use or to set the hours.
>
•
Press to confirm and continue.
The minutes will flash.
•
- +
Use or to set the minutes.
>
•
Press to confirm and exit to the current time.
Getting started