Table of Contents
Advertisement
CAUTIONS
DO NOT POUR WATER ON THE CHILLER OR CONTROL
PANEL
Do not pour water on the chiller or control panel to avoid electric
shock.
PROHIBITED
USE THE CORRECT POWER SUPPLY
This is indicated on the chiller name plate. Use of an incorrect
power supply may cause fire or electric shock.
PROHIBITED
What
voltage?
NEVER CHANGE THE SET VALUES
Never change the set values of the safety and/or protective
devices. Wrong settings may damage the chiller or cause fire.
PROHIBITED
STOP THE OPERATION WHEN COMBUSTION SMOKE IS
BLACK
Stop the operation when combustion smoke is black and call a
service engineer.
MUST BE OBSERVED
DO NOT TOUCH THE ABSORBENT
Do not touch spare or leaked absorbent, as this can cause metal
corrosion or skin disease.
PROHIBITED
OBSERVE THE SPECIFIED WATER PRESSURE
The specified chilled/hot water and cooling water pressure must
be strictly observed.
Incorrect pressure may cause the water to leak/spray which can
lead to short circuits or burns.
MUST BE OBSERVED
DO NOT TOUCH HIGH-TEMPERATURE AREAS
Do not touch high-temperature areas, as they may cause burns.
These areas are indicated by caution label.
PROHIBITED
STOP THE PURGE PUMP TO REPLACE OIL
Stop the purge pump when replacing oil to avoid possible injury
by fuel spillage.
MUST BE OBSERVED
STOP
Advertisement
Table of Contents
