Table of Contents
Advertisement
4.4 - exhibit Le (cont.)
16LJ-31 through 16LJ-32 (mm)
Notes:
1.
Dimensions (L), (W), (H) are for a standard machine. the dimensions are
changed by parts added.
2.
indicates the position of anchor bolts.
3.
Clearance space must be available at the front and rear of the chiller.
4.
All external water piping are to be provided with welded ANSI 150 Lb
flanges by the customer.
5.
indicates the position of the power supply connection on the control
panel (diameter 35 mm).
6.
Installation clearance:
Ends
1000 mm
top
200 mm
others
500 mm
Space for tube removal
Hot water outlet (6 inch)
Cooling water outlet (8 inch)
Hot water inlet (6 inch)
Chilled water outlet (6 inch)
Chilled water inlet (6 inch)
Cooling water inlet (8 inch)
16LJ-41 through 16LJ-42 (mm)
Hot water outlet
(8 inch)
Cooling water
outlet (10 inch)
Hot water inlet
(8 inch)
Chilled water outlet
(8 inch)
Chilled water inlet
(8 inch)
Cooling water inlet
(10 inch)
NOTE: Dimensions are for guidance only. Refer to the certified drawings supplied upon request when designing an installation.
rupture disk
(3 inch)
Hot water outlet
Hot water outlet
Cooling water outlet
Chilled water outlet
Wire connection
Ø 35 hole
rupture disk
(3 inch)
Cooling water in/out
Hot water
Hot water
Chilled water outlet
outlet
outlet
Wire connection
Ø 35 hole
Cooling water inlet
Cooling water inlet
tube removal
Chilled water inlet
Hot water inlet
tube removal
Hot water inlet
Chilled water inlet
Advertisement
Table of Contents
