Table of Contents
Advertisement
CONTENTS
1. Safety Instructions ..................
2. Specifications ...........................
3. Installation Instructions ...........
Assembly
4. Pump Operation .......................
Control Panel
SAFETY INSTRUCTIONS
When installing and using this electrical equipment, basic safety precaution should always
be followed, including the following:
IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW
• The spa must be supplied through an isolating transformer or supplied
through a residual current device (RCD) having a rated residual operating
current not exceeding 30mA.
• The pump must be tested before each use,to test follow the instruction of
pump.
• If the supply cord is damaged, it must be replaced by the manufacturer, it
service agent or similarly qualified persons in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension cord to connect
unit to electric supply; provide a properly located outlet.
• No part of the appliance is to be located above the bath during use.
• Parts containing live parts, except parts supplied with safety extra-low
voltage not exceeding 12V, must be inaccessible to a person in spa pool;
Parts incorporating electrical components, except remote control devices,
must be located or fixed so that they cannot fall into the spa pool.
• The plug of pump shall be more than 3.5m away from the spa.
• It is necessary to have the plug accessible after installation of the spa.
• TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA WHEN IT IS
RAINING.
• Never wear your contact lenses when in your spa.
• Do not use spa during chemical maintenance.
P05
P08
P11
P18
WARNING
ALL INSTRUCTIONS.
WARNING:
05
5. Maintenance .......................
6. Troubleshooting .................
7. Warranty .............................
P19
P22
P23
S-S-002097
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the LAY-Z-SPA VEGAS and is the answer not in the manual?
Questions and answers