Advertisement
Quick Links
Item # 46037 CLE / 7.5 ft. Nordman Fir Pro Shape FlipTree with 900 ct. Clear Lights
Item # 46037 MUL / 7.5 ft. Nordman Fir Pro Shape FlipTree with 900 ct. Multi Lights
PACKED IN ONE REUSABLE CARTON
• 1 EA. FLIPTREE STAND with Bottom "A" Section Attached
• 1 EA. TREE TOP SECTION OF TREE "B"
• 1 EA. PACKET OF EXTRA BULBS AND FUSES
• 1 EA. DELUXE TREE STORGAE BAGS (1 ea. Body of tree, 1 ea. Tree Top)
• 1 EA. RE-USABLE TREE CARTON
• 1 EA. REMOTE ON/OFF UNIT
• 1 EA. WARRANTY AND INSTRUCTIONS
• 1 EA. PACKET OF EXTRA BULBS AND FUSES
• 1 PAIR ARTIFICIAL CHRISTMAS TREE SHAPING GLOVES
1. Unpack:
Carefully place Tree Carton upright with arrows pointing toward the ceiling. Open the carton
by cutting down taped sides and opening the carton's flaps. The carton can be kept for future
storage, thrown away, or put into your recycle bins for pickup.
The Tree comes with its own Storage Bags (One for the Body of the Tree and One for the One
Piece Tree Top). These Storage Bags are put on each section of the Tree by the Factory. See
Figure 1A.
46037 / 7.5 ft. Nordman Fir Pro Shape FlipTree
F R O N T G A T E®
F R O N T G A T E®
F R O N T G A T E®
F R O N T G A T E®
OUTFITTING AMERICA'S FINEST HOMES®
INSTRUCTIONS FOR:
BILL OF MATERIAL (BOM)
TREE ASSEMBLY INSRUCTIONS
Fig. 1A
1
Page
Advertisement
Related Manuals for Frontgate OUTFITTING AMERICA’S FINEST HOMES 46037 CLE
Summary of Contents for Frontgate OUTFITTING AMERICA’S FINEST HOMES 46037 CLE
- Page 1 F R O N T G A T E® F R O N T G A T E® F R O N T G A T E® F R O N T G A T E® OUTFITTING AMERICA’S FINEST HOMES® INSTRUCTIONS FOR: Item # 46037 CLE / 7.5 ft.
- Page 2 2. Getting Tree into the Ready Position: The Pro Shape FlipTree is resting on a Styrofoam or Cardboard pad. Remove the Pad from under the Stand. IMPORTANT: THE TREE STAND IS ATTACHED TO THE TREE BY THE FACTORY, AND IT SHOULD NOT BE REMOVED FROM THE TREE. The Tree Top that is packed in its Storage Bag should be taken out of the carton and put to the side until needed.
- Page 3 As your Flip Tree is turning, the branches will fall into place as all the tree branches are on hinges. Your FRONTGATE tree is also made with a PRO SHAPE CONSTRUCTION which means all of the leaves will spring into place...
- Page 4 5. Light Set and Power Connection There are 3 Light set plugs that will come out of the bottom of the Tree Top Section “B”. They are to be plugged into the extension cord tap that will be located near the top of Tree Section “A”.
- Page 5 6. To store your PRO SHAPE FlipTree: a. Unplug the Tree’s extension cord from the wall outlet. b. Unplug the Tree Top’s light set plugs from the Tree’s upper extension cord tap. c. Take off the Tree Top and place it into the Tree Top storage bag. d.
-
Page 6: Care & Use Instructions
CARE & USE INSTRUCTIONS • Before using, inspect products carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire. • When storing the product, carefully remove the product from wherever it is placed. •... -
Page 7: Important Safety Instructions
Dear Frontgate Customer: Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or e-mail us at ps@frontgate.com. Specialists are available weekdays from 8:00 a.m. to 8:00 p.m. EST, or Saturdays from 9:30 a.m. to 6:00 p.m. EST. -
Page 8: Bill Of Material (Bom)
F R O N T G A T E® F R O N T G A T E® F R O N T G A T E® F R O N T G A T E® OUTFITTING AMERICA’S FINEST HOMES® INSTRUCTIONS FOR: Item # 46039 CLE / 9 ft. - Page 9 2. Getting Tree into the Ready Position: The Pro Shape FlipTree is resting on a Styrofoam or Cardboard pad. Remove the Pad from under the Stand. IMPORTANT: THE TREE STAND IS ATTACHED TO THE TREE BY THE FACTORY, AND IT SHOULD NOT BE REMOVED FROM THE TREE. The Tree Top that is packed in its Storage Bag should be taken out of the carton and put to the side until needed.
- Page 10 As your Flip Tree is turning, the branches will fall into place as all the tree branches are on hinges. Your FRONTGATE tree is also made with a PRO SHAPE CONSTRUCTION which means all of the leaves will spring into place...
- Page 11 5. Light Set and Power Connection There are 3 Light set plugs that will come out of the bottom of the Tree Top Section “B”. They are to be plugged into the extension cord tap that will be located near the top of Tree Section “A”.
- Page 12 6. To store your PRO SHAPE FlipTree: a. Unplug the Tree’s extension cord from the wall outlet. b. Unplug the Tree Top’s light set plugs from the Tree’s upper extension cord tap. c. Take off the Tree Top and place it into the Tree Top storage bag. d.
- Page 13 CARE & USE INSTRUCTIONS • Before using, inspect products carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire. • When storing the product, carefully remove the product from wherever it is placed. •...
- Page 14 Dear Frontgate Customer: Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or e-mail us at ps@frontgate.com. Specialists are available weekdays from 8:00 a.m. to 8:00 p.m. EST, or Saturdays from 9:30 a.m. to 6:00 p.m. EST.
- Page 15 F R O N T G A T E® F R O N T G A T E® F R O N T G A T E® F R O N T G A T E® OUTFITTING AMERICA’S FINEST HOMES® INSTRUCTIONS FOR: Item # 46040 CLE / 10 ft.
- Page 16 2. Getting Tree into the Ready Position: The Pro Shape FlipTree is resting on a Styrofoam or Cardboard pad. Remove the Pad from under the Stand. IMPORTANT: THE TREE STAND IS ATTACHED TO THE TREE BY THE FACTORY, AND IT SHOULD NOT BE REMOVED FROM THE TREE. The Tree Top that is packed in its Storage Bag should be taken out of the carton and put to the side until needed.
- Page 17 As your Flip Tree is turning, the branches will fall into place as all the tree branches are on hinges. Your FRONTGATE tree is also made with a PRO SHAPE CONSTRUCTION which means all of the leaves will spring into place...
- Page 18 5. Light Set and Power Connection There are 2 Light Set plugs that will come out of the bottom of the Lower Tree Top (Section B), they are to be plugged into the extension cord tap that will be located near the top of Tree Section “A”.
- Page 19 6. To store your PRO SHAPE FlipTree: a. Unplug the Tree’s extension cord from the wall outlet. b. Unplug the Tree Top’s light set plugs from the Tree’s upper extension cord tap. c. Take off the Tree Top and place it into the Tree Top storage bag. d.
- Page 20 CARE & USE INSTRUCTIONS • Before using, inspect products carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire. • When storing the product, carefully remove the product from wherever it is placed. •...
- Page 21 Dear Frontgate Customer: Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or e-mail us at ps@frontgate.com. Specialists are available weekdays from 8:00 a.m. to 8:00 p.m. EST, or Saturdays from 9:30 a.m. to 6:00 p.m. EST.
Need help?
Do you have a question about the OUTFITTING AMERICA’S FINEST HOMES 46037 CLE and is the answer not in the manual?
Questions and answers