Advertisement
MECHANICAL INSTALLATION
1.0 Clean outer rim and surface of motor facing
and shaft of paint, grease, dirt and other debris.
2.0 Remove housing from packaging
3.0 Slide housing on to motor facing.
Page 4
4.0 Tighten (2) 1/2"-13 UNC to a nominal 85
ft-lbs when cover option is PP. For other cover
options use all (4) 1/2"-13 screws
5.0 Slide Clamp wheel on to the shaft
6.0 Position the wheel such that its front surface
is flush with housing groove surface.
Advertisement
