Step Two: Install The Drain Joint; Step Three: Secure The Outdoor Unit; Step Four: Connect Indoor And Outdoor Pipes - EdgeStar MSPLIT12000W Owner's Manual

Step Two: Install the Drain Joint

1. Connect the outdoor drain joint into the hole on the chassis, as shown in the figure below.
2. Connect the drain hose onto the drain vent.

Step Three: Secure the Outdoor Unit

1. Place the outdoor unit on the support structure.
2. Attach fasteners, which are not included with the outdoor unit, through the foot holes of the
outdoor unit to secure it in place.

Step Four: Connect Indoor and Outdoor Pipes

1. Remove the screw on the right handle of the outdoor unit and then remove the handle.
19