Server - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
1.2.4

Server

If you move the cursor to Server, the Server menu screen appears. For the menu that has
move the cursor to it and then press the <Enter> key to show its submenus.
The Server menu screen shows the options you can configure and their features. For the menu System
Management, move the cursor to it and then press the <Enter> key to show its submenus.
Option
System Management
Power Control Configuration
Assert NMI on PERR
Assert NMI on SERR
FRB-2 Policy
Boot Monitoring
Boot Monitoring Policy
70
Parameter


Disabled
Enable or disable feature to detect PCI PERR.
[Enabled]
Disabled Enable or disable feature to detect PCI SERR.
[Enabled]
[Retry 3 Times] Specify how the system should operate if FRB level 2
Disable FRB2 Timer errors occur.
Always Reset
[Disabled] Enable or disable the boot monitoring feature and specify
5-60 minutes the timeout period.
To use this feature, NEC ESMPRO Agent must be
installed on OS. If starting up an OS on which it is not
installed, disable this feature
[Retry 3 times] Specify the processing to be done when time-out was
Always Reset enforced during boot monitoring and the server was
automatically reset.
Retry 3 times: Attempts to boot OS up to three times.
Always Reset: Retries booting the OS repeatedly.
This option can be selected only when Boot Monitoring
has been enabled.
Express5800/E120d-1 Maintenance Guide
1. System BIOS
on the left,
Descriptions


(1/2)