Panasonic KX-TA624 Manual page 3

From the designated attendant console (usually x100, but not
always), enter the following code sequence:
To set the date and time:
1.- Press the ON/OFF key
• The phone issues intercom dial tone.
• The current date and time are displayed on your LCD.
2.- Press the PROG key.
"F" appears on the display
3.- Dial "##."
"Program Mode:" appears on the first line of the display;
"MAIN MODE" appears on the second line.
4.- Press the FF1 key.
"SELECT SUB MODE" appears on the second line of the
display.
5.- Dial "1#."
"1:DATE 2:TIME" appears.
6.- Dial "1#."
"MONTH/DAY/YEAR" appears.
7.- Enter six digits for the month, day, and year.
For example, to set the date to March 3, 1993, enter
"030393."
8.- Press #.
"TIME SET MODE appears on the display.
9.- Enter four digits for hours and minutes (24-hr. time).
For example, for 11:00 a.m., enter "1100."
10.- Press #.
11.- Press the ON/OFF key.
The new date and time appear on the display
Panasonic Digital Telephone System
Changing the time on a Panasonic KX-TD, KX-TDA or KX-
TDE digital system can be done from any display phone.
1.- Enter programming mode by pressing "PROGRAM"
button then "STAR" button twice, followed by 1, 2, 3, 4
2.- Enter program "000" and press Enter
3.- Press "SPEAKER" button two times, you will see the time.
4.- Enter the correct hour.
5.- Press "FORWARD/DND" button to advance to the minute
selection
6.- Enter the correct minutes (if necessary to update).