Kronos InTouch DX User Manual page 71

Tap one of the following:
• Yes: Return to "Select Finger to Enroll," and select another finger.
• No: The enrollment process is completed.
Failed
Do one of the following:
• Tap Retry. Return to step 2. Re-scan the same finger, and try to achieve an
Accepted enrollment test.
• Tap Change Finger. Return to step 1 and select a different finger.
Managers: If the employee fails the enrollment test three consecutive times, on a
timeclock that is configured for biometric verification, the system prompts you to
change the threshold, or ask the employee to enroll a different finger.
Note: The employee should first attempt to successfully enroll any finger, by
tapping Change Finger, before you consider lowering the threshold.
A lower threshold—Normal or Low—allows a wider variance between the
enrollment template and the live fingerscan. This adjustment increases the chance
that the device will accept the employee's test results—but it also increases the
chance that the device will incorrectly accept another employee's fingerscan.
Furthermore, if you lower the threshold from High, these templates will be
ineligible for biometric identification—but they can be used for biometric
verification or biometric identification with badge ID. If you set the threshold to
None, the device will always accept the employee's test result, regardless of its
quality. When you lower the threshold setting at this screen, it applies to the
current employee only.
Biometric transactions: Kronos Touch ID Plus
71