Restart Device; Change Maintenance Mode Password - Kronos InTouch DX User Manual

1. Tap Edit Advanced Settings.
2. Tap Employee Enroll Count.
3. To view the names of the employees in each group, tap the appropriate row.

Restart Device

Note: You can also restart a device using the host application. Access the Device
Details page, open the Troubleshooting menu, and select Reboot Device.
Use the Restart Device function to restart the timeclock.
1. Tap Edit Advanced Settings.
2. Tap Restart Device.
3. To confirm your selection, tap Restart.
Important: If the device is not responding, you can reboot it using the restart
button on the main board, which is on the inside cover of the device. To remove
the cover, use the security wrench that was shipped with the device. You must
press and hold the button for four seconds. For details, see
mode button"

Change Maintenance Mode Password

Use this function to change the password for a Maintenance badge, and to require
users to enter a password when they swipe their badges.
1. Tap Edit Advanced Settings.
2. Tap Change Maintenance Password.
3. Enter the Current Password.
4. Enter the New Password.
5. Re-enter the new password and tap Enter.
6. Select the Password Strength:
on page 100, and the accompanying illustrations.
Edit Advanced Settings
"Use the maintenance
117