Tuning Procedure; Station Presetting Procedure; Deletion Of Preset Memory - Hitachi Zaxis 17U-5A Operator's Manual

Tuning Procedure

1. Manual Tuning Procedure
Push UP button (3) to increase the frequency by
one step. Push DOWN
frequency by one step.
2. Automatic Tuning (Auto-Seeking)
Push UP button (3) or DOWN
scan the frequency upward or downward. When a station
is received, the auto-seeking function is deactivated so
that the received frequency station is tuned in.

Station Presetting Procedure

1. Select MW (AM) or FM by pushing AM/FM switch (5).
2. Push one of PRESET buttons (7) long to save the
receiving frequency in memory. When the preset
procedure completes, the PRESET button No. flashes 3
times and frequency display becomes ON.
3. Repeat steps 1 and 2 for other PRESET buttons (7).
 Station Auto-Presetting Procedure
Pushing SOUND control switch (2) long with the radio
switch ON will search for the optimum receiving radio
frequency stations and automatically allocate each station
in preset memory buttons (1 to 6).
f
NOTE: Performing auto-presetting operation will delete the
stations previously saved in memory.
If it is difficult to set the memory of the desired station to the
desired button, follow the preset procedure.

Deletion of Preset Memory

If the battery power is disconnected while servicing the
machine or by removing the radio, the preset memory in
PRESET buttons (7) will be deleted. In this case, preset the
stations again.
OPERATOR'S STATION
button (3) to decrease the
button (3) long to
5
1-11
3
M1NE-01-003
7
3 2
M1NE-01-003