Cerbo GX Manual
Other parameters related to that function can be configured by entering the device menu and selecting Setup.
For sensors and alarms, you can decide whether the input should be treated as an alarm condition, whether the labels should be
inverted, and whether the logical levels should be inverted.
• To swap the labels attached to the alarm, set Inverted to on.
• If a logical low input (0V) should be considered a positive condition, set Inverted alarm logic to on.
12.2. Read-out of digital inputs via Modbus-TCP
The values/states of the digital inputs are available on Modbus-TCP. For more details about this, please download a copy of the
document "Modbus-TCP register list" from our website. And see our
Modbus-TCP
FAQ.
60
Need help?
Do you have a question about the Cerbo GX and is the answer not in the manual?
Questions and answers