Installation & Operation; Notes On Installation - Siemens SIMATIC RTLS Series Operating Instructions Manual

Installation & Operation
3.1

Notes on installation

Note
Before you install the devices, read this section carefully to ensure trouble-free installation
and commissioning.
The devices can only be used in conjunction with the RTLS localization system. The radio
address of the RTLS4030T can be obtained from the data matrix code printed on the device.
Mount the device so that it has a direct line-of-sight connection to the gateways (360°
panorama view). Any type of material can impact wireless localization. Wireless localization
through metal is not possible. In this case, localization via wireless reflections can occur
which results in an inaccurate localization.
Check the device for damages before you use it so that it is not damaged during operation.
The specified operating temperature ranges must be observed.
The device contains a lithium battery.
Fires and burns
Improper handling of batteries can lead result in fires and burns.
The housing of the device must not be squashed, punctured or exposed to other mechanical
influences. It may only be opened to change batteries.
Never expose the device to fire, temperatures above 50 °C or direct sunlight for an extended
period of time.
In dry environments the device battery must be replaced.
SIMATIC RTLS4030T
Operating Instructions, 06/2020, C79000-G8976-C520-03
CAUTION
3
11