Huawei SUN2000 Series User Manual page 44

SUN2000-(8KTL-20KTL)-M2
User Manual
● Pay attention not to damage the core wire when stripping a cable.
● The cavity formed after crimping the conductor strip of the OT terminal needs
● Wrap the wire crimping area with the heat shrink tubing or the PVC insulation
● When using the heat gun, protect devices from being scorched.
Figure 5-2 Crimping an OT terminal
(1) Cable
(4) OT terminal
Step 2 Connect the PE cable.
Figure 5-3 Connecting the PE cable
Issue 01 (2020-07-02)
NO TICE
to wrap the core wire completely. The core wire needs to contact the OT
terminal closely.
tape. The following figure uses the heat shrink tubing as an example.
Copyright © Huawei Technologies Co., Ltd.
(2) Core wire
(5) Crimping tool
5 Electrical Connections
(3) Heat shrink tubing
(6) Heat gun
37