SUN2000-(8KTL-20KTL)-M2
User Manual
Figure 4-7 Mounting bracket dimensions
4.5.1 Wall-mounted Installation
Procedure
Step 1 Determine the installation positions for drilling holes, and mark the positions
using a marker.
Step 2 Secure the mounting brackets.
Figure 4-8 Expansion bolt composition
(1) Bolt
Issue 01 (2020-07-02)
NO TE
Two M6 screw holes are reserved on both left and right sides of the enclosure for installing
an awning.
NO TE
● M6x60 expansion bolts are delivered with the SUN2000. If the length and amount of the
bolts do not meet installation requirements, prepare M6 stainless steel expansion bolts
by yourself.
● The expansion bolts delivered with the inverter are used for solid concrete walls. For
other types of walls, prepare bolts by yourself and ensure that the wall meets the load
bearing requirements of the inverter.
Copyright © Huawei Technologies Co., Ltd.
(2) Nut
4 Installation
(3) Spring washer
26