HP ProCurve 6400cl Series Access Security Manual page 320
Hide thumbs
Also See for ProCurve 6400cl Series:
- Management and configuration manual (508 pages) ,
- Installation and getting started manual (84 pages) ,
- Management manual (664 pages)
Table of Contents
Advertisement
Configuring Port-Based and Client-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
Table 10-3. Output for Determining Open VLAN Mode Status (Figure 10-5, Lower)
Status Indicator
Meaning
Status
Closed: Either no client is connected or the connected client has not received authorization through
802.1X authentication.
Open: An authorized 802.1X supplicant is connected to the port.
Authenticator State
Connecting: A client is connected to the port, but has not received 802.1X authentication.
(3400cl and 6400cl
Force Unauth: Indicates the "Force Unauthorized" state. Blocks access to the network, regardless
switches, and 5300xl
of whether the client supports 802.1X authentication or provides 802.1X credentials.
Switches Running a
Software Release
Force Auth: Indicates the "Force Authorized" state. Grants access to any device connected to the
Earlier Than E.09.xx.)
port. The device does not have to support 802.1X authentication or provide 802.1X credentials.
Authorized: The device connected to the port supports 802.1X authentication, has provided 802.1X
credentials, and has received access to the network. This is the default state for access control.
Disconnected: No client is connected to the port.
Authenticator
Idle: The switch is not currently interacting with the RADIUS authentication server. Other states
Backend State
(Request, Response, Success, Fail, Timeout, and Initialize) may appear temporarily to indicate
(3400cl and 6400cl
interaction with a RADIUS server. However, these interactions occur quickly and are replaced by
switches, and 5300xl Idle when completed.
Switches Running a
Software Release
Earlier Than E.09.xx.)
Current VLAN ID
< vlan-id >: Lists the VID of the static, untagged VLAN to which the port currently belongs.
No PVID: The port is not an untagged member of any VLAN.
Current Port CoS
These two fields are present in 3400cl and 6400cl switches, and 5300xl switches
running software release E.09.xx or greater.
% Curr. Rate Limit
Refer to the section describing RADIUS support for Identity-Driven
Inbound
Management—IDM—in chapter 6, "RADIUS Authentication and Accounting"
in this guide.
10-46
Advertisement
Table of Contents
